USB Capture HDMI Gen 2 Dongle
Magewell PN: 32060 Dongle HD Capture à un canal
Description
- Pas besoin d’installer de pilotes sous Windows, Linux et Mac OS X, plug and play.
- Déterminez automatiquement le format vidéo d’entrée et convertissez-le automatiquement à la taille de sortie et à la fréquence d’images spécifiées.
- Déterminez automatiquement le format audio en entrée et convertissez-le automatiquement en audio stéréo PCM à 48 KHz.
- Prend en charge une entrée vidéo allant jusqu’à 2048 x 1260p 60Hz.
- Sortie vidéo supportant jusqu’à 1920x1200p 60 Hz.
- Le traitement vidéo et audio est effectué par le dongle et n’occupe pas le processeur. Le traitement comprend une augmentation / réduction de la résolution vidéo, de la fréquence d’images et de la fréquence d’échantillonnage audio.
- Prend en charge la luminosité, le contraste, la teinte, la saturation et d’autres fonctions de réglage de l’image.
- Supporte le format de sortie: 4: 4: 4, 4: 2: 2, YUY2, RGB 24, 8 bits.
Interface | Video Engine | Signal Detection & Support | Software Environment |
---|---|---|---|
Input Interface • HDMI x1 • Support input resolution up to 2048×2160 pixels Host Interface • USB 3.0 | 8-bit video processing Deinterlace Cropping Color Adjustment Color Space Conversion Up/down Conversion Aspect Ratio Conversion Mirror and Flip | Auto Detection of Input Signal Format 3D HDMI | OS • Windows, Linux, Mac, Chrome OS Driver and Firmware • Driver Free, Updatable Firmware Included Software • USB Capture Utility, Capture Express Compatible Software 50+ |
USB Capture Utility V3
USB Capture Utility V3
Utility V3 est un logiciel gratuit pour les périphériques USB Capture et USB Capture Plus. Les utilisateurs peuvent facilement vérifier et définir les paramètres liés à la capture, mettre à niveau le firmware par eux-mêmes et exporter les informations nécessaires au support technique à l’aide de l’utilitaire.
Téléchargez l’utilitaire pour USB Capture Family et pour USB Capture Plus Family.
Les fonctionnalités incluent;
• Réglage du format de capture
• Contrôle de volume audio
• Miroir et Flip
• EDID Édition et Importation
• Mise à jour du firmware
• Exporter le rapport de diagnostic
Pour une description complète, visitez la page complète;USB Capture Utility V3 Utility V3 fournit également des fonctions telles que le recadrage, le désentrelacement, le paramétrage du nom de périphérique, la conversion du rapport de format, le réglage de la cadence, le paramétrage de l’image de statut, etc. Pour une présentation détaillée des paramètres et des fonctions, reportez-vous à la section Utility V3 User Manual. |
Caractéristiques
Supported OS Windows
• Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
Linux (support x86, x64 & ARM architecture)
• Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
• CentOS 6.5/7 (x86 & x64)
• Fedora 25/26/27 (x86 & x64)
• Red hat 6.5 and above (x86 & x64)
• Other Linux OS with kernel version 2.6.35 and above
Mac
• OS X 10.9/10.10/10.11
• macOS 10.12/10.13
Chrome OSRecommended OS (tested) Windows
• Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
Linux
• Ubuntu 12.04/14.04/16.04 (x86 & x64)
• Ubuntu 17.04/17.10 (x64)
• CentOS 6.5/7.2 (x86 & x64)
• Fedora 25/26 (x64)
• Red hat 6.5 (x86 & x64)
Mac
• OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
• macOS 10.12/10.13.2/10.13.3Supported APIs Windows
• DirectShow
• Wave API/DirectSound/WASAPI
Linux
• V4L2
• ALSA
OS X/macOS
• QuickTime
• AV FoundationSupported Software VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming softwareInput Interfaces HDMI
• DVI-D 1.0
• HDMI 1.4aHost Interface USB 3.0
• compatible with USB 2.0
• compatible with USB 3.1 Gen 1Input features Support for input video resolutions up to 2048x2160 HDMI Specific Features 165MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit color depth
Support for RGB 4:4:4,YCbCr 4:4:4,YCbCr 4:2:2 color sampling
Support for 2 channel IEC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.Video Capture format Support for capture resolutions up to 2048x2160
Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.)
• 1920x1080 YUY2 (up to 75fps)
• 1920x1080 RGB24 (up to 60fps)
Support for YUY2 & UYVY 4:2:2 8-bit
Support for RGB24 & RGB32 4:4:4 8-bit
The default capture format is YUY2. More capture formats can be set using USB Capture Utility.Video Processing Features Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video de-interlacing
• Weave
• Blend top & bottom field
• Top field only
• Bottom field only
Video aspect ratio conversion
• Auto or manual selection of input aspect ratio
• Auto or manual selection of capture aspect ratio
• Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
• Auto or manual selection of input color format & quantization range
• Auto or manual selection of capture color format, quantization range & saturation range
• Support for RGB, YCbCr 601, YCbCr 709 color formats
• Support for Limited or Full quantization range
• Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Vertical flip and mirrorMultiple devices on one computer Support for connecting multiple USB devices to one system
Support for setting the device serial number as the device name shown in the system using USB Capture UtilitySDK The USB Capture SDK provide functions including signal status extraction, capture configuration, etc. Firmware Upgrade Multiple devices in one system can be upgraded simultaneously LED Indicator Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed. Form Factor 92.2mm (L) x 40.2mm (W) x 12.3mm (H) Accessories USB 3.0 cable Power Consumption 5V max current: ~0.5 A
max power consumption: ~2.5 WWorking Environment Operating temperature: 0 to 50 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing
Accessoires
![]() |
USB 3.0 Câble Numéro d’article : 90061 |
Téléchargements
Télécharger: User Manual USB Capture Utility
Télécharger: Tech Specs USB Capture Family
Télécharger: Product Catalogue
Télécharger le logiciel: USB Capture Utility V3
Related products
- MORE INFO
USB Capture HDMI 4K Plus
Magewell PN: 32090 Périphérique de capture 4K à un canal
Capture HDMI + audio intégré
- Signal HDMI en boucle
Entrée audio via micro
Extraire la sortie audio intégrée HDMI via un casque
Prise en charge HDMI 2.0, 4Kp60 4: 4: 4 en entrée. Capturez à partir des dernières consoles de jeu telles que PS4 Pro et XBOX One S